ProductsThermal blanketAboutContactGet a quote

Packaging film guide

The right film decides how long a product keeps, how it looks on the shelf and how it runs on the machine. Here is a short guide to the films we supply and what to know when you order.

FilmBaseLookStrengthTypical use
OPP (BOPP) filmBiaxially oriented polypropyleneCrystal clear, glossyStiff, strong, good moisture barrierFood, stationery, textiles, flowers and gift packs
CPP filmCast polypropyleneClear, softSeals easily with heat, flexibleBread, bakery and textile bags; inner layer in laminates
Metallized film (MOPP / MPET)Aluminium on an OPP or polyester baseMirror silverStrong barrier to light, moisture and oxygenCrisps, coffee, chocolate, biscuits; thermal blankets (MPET)
Pearlized filmCavitated OPPOpaque white, pearly sheenLight, opaque, blocks lightIce cream, confectionery, soap and biscuit packs
Stretch filmLinear low-density polyethylene (LLDPE)Clear, slightly tackyStretches a lot, holds loads tightPallet wrapping, securing boxes and loads
Tear tapeOPP stripThin clear, coloured or metallized stripOpens a pack along a straight lineCigarette overwraps, tea and sweet cartons, courier bags

OPP or CPP?

Both are polypropylene but made differently. OPP (BOPP) is stretched in two directions, so it is stiffer, glossier and stronger; it suits packs that should stand up and look crisp.

CPP is cast and not stretched. It is softer and seals more easily, at a lower temperature, which is why it is common in bags and as the inner layer of laminates.

Metallized OPP versus metallized polyester

Metallized films carry a very thin layer of aluminium deposited under vacuum. It blocks light, moisture and oxygen and so protects the product.

Metallized OPP is lighter and more economical. Metallized polyester (MPET) is stiffer, more heat resistant and a stronger barrier; thermal blankets are made from metallized polyester too.

What does micron (µ) mean?

Film thickness is measured in microns: one micron is a thousandth of a millimetre. Packaging films usually run from a few microns to a few tens of microns. Thicker film is sturdier and stiffer; thinner film is lighter and more economical.

The right thickness depends on the product's weight, the packaging machine and the look you want. If you are not sure, simply send us a sample of the pack you use.

Rolls or sheets?

Films leave the mill as wide jumbo rolls. For automatic packaging machines we slit them to your width and rewind them onto narrow rolls.

If you pack by hand or need cut pieces, we cut the film to length on the sheeter and trim the stacks to exact size on the guillotine.

What to tell us for a quote

These details are enough for us to quote quickly. Where you are unsure, we can work from a sample of your current pack.

  • Film type (OPP, CPP, metallized, pearlized, stretch)
  • Thickness (microns)
  • Roll width, or sheet width × length
  • Roll outer diameter, length or weight
  • Core (inner) diameter
  • Total quantity and the date you need it

Short glossary

Jumbo roll
The wide parent roll that leaves the film mill.
Slitting
Cutting a jumbo roll into narrow rolls of the required width with circular knives.
Sheeting
Cutting film from a roll into sheets of a set length.
Core
The cardboard or plastic tube the film is wound on.
Barrier
How well a film stops light, moisture, oxygen or aroma getting through.

Not sure which film suits you? Tell us about your product and packaging machine and we'll choose together.